Build a Folding workbench

May 2nd

Folding workbench – The main thing you need to do is get your hands or sketch your own plan and gather all the supplies that you will need to create the work. If you do not know how to build a folding Workbench, then find out the project on the Internet. After that you have to put 1-inch Board 4 sides and the differences are 22 inches from each other. Toe 4 Board must butt at the end of the Board. Use two nails in each segment, when their security.


Next, place a piece of plywood on top of the frame. Make sure the plywood is flush with the modular frame on all sides, and make sure that folding workbench there is no overhang on one side. Spaces separate six inch nails when attaching plywood to the frame. Change the bench legs to put down. The next is 3 x 3 inches in the corner and mount the hinges keep the feet to the edge of the post is in the middle of the table. Hinges should be screwed to the bottom of the legs, and then to the police station.

12 Photos Gallery of: Build a Folding workbench

Image of: style-folding-workbench
Image of: small-folding-workbench
Image of: simple-folding-workbench
Image of: long-folding-workbench
Image of: ideas-folding-workbench
Image of: function-folding-workbench
Image of: design-folding-workbench
Image of: cool-folding-workbench
Image of: black-folding-workbench
Image of: best-folding-workbench
Image of: awesome-folding-workbench
Image of: amazing-folding-workbench

Then you have to attach the hook key until the end of the disc about an inch from the post make sure hook you can get to the posts. When you connect, you must attach the Screw, which eyes are posting in the right place, to connect to a contact. Then the next post should be located four inches from the corner. Add another hinge in the same way as the first post, as well as with the eye bolts. This procedure is a repeat on opposite ends of the folding workbench. At the end of the work bench post reverse offset distance from the other side. From a distance of planting it allows the foot to close a table, working table without foot overlap. When this occurs, turn the workbench on the top and respect for work.