Making your own vintage shower curtains is a cheap way to personalize your bathroom. And most shower curtains measure 72 inches by 72 square inches. However, you can change this to whatever measure you need. Realization of a vintage shower curtains, buy your fabric. If you have a pattern, make sure it has at least one repeat pattern. Cut two fabric panels 88 “long, this will allow 8 inches of hem on each end. Take a panel and cut it in half lengthwise.
Then for make custom vintage shower curtains, pin the right sides of each half of the split panel to the right side of the full size panel. Make sure the patterns line up. Sewing the panels together using a 1/2 inch seam allowance along the selvage edge. On each side edge, turn the edge less than 1/2 inch, and then another 1/2 inch and the hem. For top hem, turn the 1 inch low edge, and then another 1 and the hem. With the bottom edge, except bend the edge 3 inches at a time.
Add eyelets or eyelets to the top edge of the shower curtain rings. Generally, they should start and finish 3 inches from each end with 6 inches of separation from each ring. Hang your shower curtain and enjoy. Tips and warnings for make custom shower curtains, if you are using plastic or laminated fabric, use clips to hold the fabric in place.